Accessories Installation Guide

  The modular floating cube is composed of every single cube connected with various accessories, and is formed into a floating platform with different functions and shapes according to needs. The principle of connection is to connect the four earrings on the side of the buoy with the connectors. We can combine cubes into facilities of any size and structure. The floating platform system can also be installed with 2-3 layers with long screw.

 

 

 

1. How to connect the cubes:

 

Every ear have digital on it, put the ear with difference digital together, then we can connect them with pins or screw.












2.How to install the short pin:


Insert the short pin into 4 earrings at a 45°angle and twist it 45° counterclockwise with a stainless steel wrench


Step onePlace the earrings in order.

 

Step twoInsert the short pin into 4 earrings at a 45°angle.

 

Step threetwist it 45°counterclockwise with a stainless steel wrench.

 

Step four:Finish.















3.How to install the long pin


Insert the long pin through the ear rings of two layers, twist the long pin 45°counterclockwise with a stainless steel wrench

 











4. How to install the short screw and nut




Insert the short screw into the earring on the side of the cubes platform and lock the nut with a small nut wrench. Please note that when the digital on the cube are one and four, there is a gap between the earring, 2 washer will be needed. If there is no gap between the two earrings, then no need to place washer.












5.How to install the long screw and nut



Insert the short screw into the earring on the side of the cubes platform and lock the nut with a small nut wrench.(Similar to the installation of short screw and nut)

 








6.How to insert the Horn Plug And Nut:


Insert the short screw into the earring on the side of the cubes platform and lock the nut with a small nut wrench.(Similar to the installation of short screw and nut)

 









7.How to install the handrail:

 

7.1  When the handrail is on the side of the platformA handrail must be used with 3washers to tightly lock. Insert the railing into the earrings and lock the nut with a small nut wrench.



     




 

7.2 When the handrail is on the middle of the platform:A handrail must be used with 1 washers to tightly lock. Insert the handrail into the earrings in the middle of the cube, and then lock the nut with a small nut wrench from the bottom of the cube. Please note that the washer must be placed before the lock nut.






        



   8.How to fill the cubes with water:


First, find the small hole between the earring 1 and 2, use the specific tool to open the lid and fill the float with water.









9.How to install the bollard:


Insert the bollard into the earring, then lock the nut with a small nut wrench from the bottom of the cube. The installation will be similar whether it is single bollard or double bollard.







10.How to install the Anchor connector:


10.1  Outer anchor connector:Insert the outer anchoring connector through the earrings and lock it from the top with stainless steel gaskets and bolts. We also need 2 pieces of plastic gasket to fill the gap between the outer anchor connector and the earring.





   





110.2 Inner anchor connector: Insert the inner anchoring connector through the earrings and lock it from the top with stainless steel gaskets and bolts. 























 











Leave a message

Leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

Contacts

top